Apple and Samsung Test Durable Foldable Display Glass for 2028 Devices

Apple and Samsung are testing durable foldable display glass using selective etching to eliminate screen creases and scratches by 2028.

Next-generation ultra-thin glass technology enhancing durability in foldable smartphone models
Photo: Compagnons / Unsplash

Apple and Samsung are testing a selective etching method for foldable display glass to boost scratch resistance on 2028 devices.

Apple and Samsung are testing a hybrid foldable display glass architecture designed to solve persistent screen fragility and scratch concerns on flexible devices, according to supply chain reports shared by Webtekno. The manufacturers plan to introduce the technology on consumer hardware by 2028, using selective material reduction to reinforce high-contact areas without compromising hinge flexibility.

Current foldable smartphones rely on a single, uniform layer of glass across the entire inner panel to accommodate folding mechanics. While this thin profile permits continuous bending, it leaves the screen vulnerable to deep scratches caused by everyday items such as coins, keys, or fingernails. Equipment makers have historically faced a strict engineering trade-off: thickening the entire glass sheet triggers hinge-area cracking, whereas keeping the entire sheet thin produces premature wear and a noticeably soft touch surface.

The new engineering effort eliminates this uniform thickness limitation by applying varying depths across different zones of the panel.

Selective Etching for Foldable Display Glass

The joint industry approach relies on selective chemical etching applied to ultra-thin glass (UTG) panels. During this fabrication process, technicians precision-etch only the central axis where the display bends, reducing glass thickness in that specific zone to approximately 40 micrometers. In contrast, the rigid active areas where users tap and swipe remain significantly sturdier, measuring more than 100 micrometers thick.

This structural variation marks a substantial departure from current commercial standards. Samsung's Galaxy Z Fold 8 features a uniform 60-micrometer glass layer, while the Galaxy Z Flip 8 uses a 50-micrometer sheet. Meanwhile, competing hardware including the Galaxy Z Fold 8 Ultra and the Apple iPhone Duo utilizes a uniform 45-micrometer glass thickness across the folding surface.

By tripling the glass thickness across non-bending sections, the new hybrid panels provide standard smartphone rigidity where fingers apply direct pressure.

Optical Resin Prevents Display Distortion

While selective etching preserves mechanical flexibility along the spine, altering glass thickness introduces optical obstacles during assembly. Variations in panel depth alter light refraction angles, which can produce noticeable visual seams, ripples, or color distortion directly along the central viewing area. To counteract these artifacts, manufacturers apply a specialized liquid resin into the etched channel.

This chemical filler precisely matches the refractive index of the surrounding ultra-thin glass. Once cured, the resin eliminates visual boundaries caused by thickness transitions, ensuring that light travels uniformly through the panel regardless of viewing angle. The complex multi-stage filling process ensures users encounter a seamless, flat visual canvas rather than a visible mechanical furrow.

Diverging Under-Panel Support by Apple and Samsung

Although Apple and Samsung share the same selective etching concept for the exterior glass, their structural approaches diverge beneath the flexible OLED panel. Apple incorporates a secondary 40-micrometer ultra-thin glass sheet beneath the display stack. This dual-glass architecture provides structural reinforcement from underneath, specifically targeting the reduction of panel creasing and micro-wrinkles along the hinge radius.

Samsung is exploring its own under-panel glass solutions, but the company continues to rely on titanium support plates in current prototypes. The high tensile strength and light weight of titanium help dissipate bending stresses while maintaining panel rigidity during repetitive folding cycles.

Supply chain sources indicate that both tech giants plan to finalize mass-production decisions in the fourth quarter of 2027. If pilot manufacturing achieves acceptable yield rates and reliability metrics, the etched displays will reach retail shelves in 2028 foldable smartphone lineups. Successful implementation could finally eliminate the soft, vulnerable screen feel that has defined foldable devices since their inception.

✍️
Editor's Note: Why It Matters
At TeknoRest, we view selective etching in foldable display glass as a viable solution to one of hardware engineering's most frustrating compromises. Current uniform profiles—such as 60 micrometers on the Galaxy Z Fold 8 and 45 micrometers on the Apple iPhone Duo—leave panels vulnerable to routine fingernail and key marks. Increasing non-folding surfaces beyond 100 micrometers while maintaining a 40-micrometer crease directly targets surface durability. However, filling the etched groove with refractive-index-matched resin introduces significant manufacturing complexity. The final production decision slated for late 2027 will ultimately demonstrate whether suppliers can achieve viable mass-production yields without optical defects.

Frequently Asked Questions (FAQ)

What differentiates the selective etching glass technique from current foldable screens?

Existing foldable smartphones use a single uniform glass thickness across the entire panel. In contrast, the selective etching technique thins only the folding axis to approximately 40 micrometers while leaving non-folding display areas thicker than 100 micrometers to resist scratches.

How do Apple and Samsung differ in their under-panel support structures?

Apple adds a secondary 40-micrometer ultra-thin glass layer underneath the OLED display to minimize creasing, while Samsung utilizes titanium support plates in current prototypes to maintain panel stability.

When is this next-generation foldable display glass expected to enter production?

Apple and Samsung plan to make final mass-production decisions in the fourth quarter of 2027, aiming to launch the new displays on foldable smartphone models in 2028.

Editor: Teknorest Editör Ekibi
🛡️ Primary Source: Webtekno | Curated & synthetically analyzed by TeknoRest Editorial Desk with full source attribution (Law No. 5846 Art. 36). Editorial Imprint & Copyright